V2.6 Help, If you need help and cannot find it in the FAQ area of this forum feel free to ask the question and someone will reply back.
Moderators: webmaster, Christian, Kuok-Tim, ChrisClark, Forum Support
by awrw » Sat Jan 08, 2011 8:54 pm
We are currently using Zionworx with the following setup.
PC with Nvidia Geforce G210 graphics linked by VGA to projector (2nd display shows words in dual/extended view) and by DVI to PC's own flat screen for song selection / operator use (main display). This is working well.
We would now like to add a 2nd flat screen - preferably a HDTV - this would have the same display as the projector - for display to the worship team.
What would be the best way to do this - could we split the VGA projector signal to the PC using a VGA splitter cable / box and run this 2nd cable to the 2nd screen as a VGA/HDMI link ? (I have tried to do this using a VGA splitter cable and a 2nd flat screen monitor and am getting no display - only a green light on the 2nd monitor)
Would be grateful for any help.
-
awrw
- Junior
-
- Posts: 1
- Joined: Tue Mar 18, 2008 9:38 am
by brainier » Sun Jan 09, 2011 9:12 pm
Rather than a splitter cable, which requires the video card to have enough power to drive two monitors, we use a video splitter/distribution amp. Here is one Amazon sell in the UK:
http://www.amazon.co.uk/StarTech-com-Vi ... 16&sr=8-12.
We have used this for years without issue. Our 2nd screen output goes to the projector (VGA) and a second screen for the PC operator (because they cannot see the projection screen well from where they sit).
-
brainier
- Expert User
-
- Posts: 325
- Joined: Sun Oct 02, 2005 7:51 pm
- Location: Oxford, UK.
-
Return to Zionworx V2.6 Support
Who is online
Users browsing this forum: No registered users and 7 guests