Zionworx

G'day all.

Zionworks is working really well however the output screen (projector) is not quite filled by Zionworx. A small strip of the desktop image is visible at the bottom of the screen. I can work around this, but I would like to fix it.
Any clues?

Cheers,

Marcus G.

The ony time I've had trouble with something like this is then zionworx was not completely maximised - it might be worth while pressing the button in between the minimise and cross buttons in the top right hand corner. This will either make the display smaller or solve the problem (if it makes it smaller, simply press the same button again).

Hope this helps, and if so please post so that if this issue occurs again there is a readily available solution.

Thanks,
Chris

Hi Chris,

Yeah I tried the maximise thing and it had no affect. The output screen remained as is. By the way - I booted it all up this morning and the problem was rectified! It was suggested that screen resolutions may be causing this problem but mine are all set right and I couldn;t fault it that way either.
hmmm... mystery.
I'm just thinken that yesterday I fiddled with the task bar... perhaps moving it around caused the issue... I'll try next time I am playing with it.
Thanks for you help.

Marcus