First, this progam looks awesome! A buddy of mine just told me about it and we're trying it out to replace Powerpoint for Sunday AM.
Now onto the question. I've read through all of the posts concerning alignment problems under various resolutions. I still have a problem.
I'll list my configuration below but will throw the problem out here. If I have both displays set to 800x600 everything works fine. Bumping display 1 up (currently 1280x1024) and then starting Zionworx causes about a third of the zionworx display to "bleed" onto the primary monitor and be misaligned top to bottom on the display 2 (presentation).
Here's the setup:
PC: 500mhz P-III Dell Optiplex
Vid Card 1: Matrox Radeon 7000. Out 1 is SVGA and is Display 1. Out 2 is digital out and is disabled in XP display properties (though I believe still active, just with nothing extended to it).
Vid Card 2: Diamond (Nvidia Riva TNT) using TVTool to correctly align. This card has s-video and SVGA out. SVGA out goes to monitor, S-Video goes to Projection TV.
Currently I have the Nvidia display at the upper right hand corner of the Matrox display.
It should be noted that XP lists the Nvidia as (1) and the Radeon as (2) but I have checked that the Radeon is the primary monitor.
Thanks again,
Bob